PRODUCTS

Shaft Cover

The shaft cover provides protection by hiding your electrical and mechanical installations on the structure in a safe and decorative way. In the event of a possible fire, the installation shafts make a chimney effect and allow the fire to progress rapidly to the upper zones, while the use of the installation shaft cover prevents the fires occurring in the area from reaching the installations and the fires that may occur in the installation shafts to reach the usage areas.

Its fixed outer frame is made of Aluminum and its movable inner frame is made of galvanized material resistant to bending and buckling.

In addition to all the functionality of the control covers, the Fire Resistant Shaft Cover keeps the spread of fire at a minimum level for 90 minutes and allows people to escape to safe areas. Smoke and heat are the two main damaging factors in fire and the Shaft Cover does not allow exposure to these elements.

SURFACE COATING:

- Standard Coating is Natural Galvanized Sheet.

- Optionally, it is produced as standard Ral 9010-9016 and other colors with electrostatic powder paint.

INSTALLATION:

- As standard, it is mounted with screws through countersunk holes with a diameter of 4 mm around the grille.

- In cases where a hole is not desired in the frame; A latch (clip) or internally hidden screw system is used.

ACCESSORIES:

- If desired, the cover can be made with or without insulation.

- Open-Close Mechanism It can be made with automatic snap and snap mechanism, with latch (clip), with key (triangle, with lock), hinged type.